Pebaro 0210 Instrucciones página 5

 If the cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
1. Check that the voltage of iron and source are corresponding.
2. Make sure the iron tip is firmly secured by tightening the screw.
3. The pins of the plug must be perfectly clean.
4. Connect soldering iron to the main.
5. Clean the soldering tip with a wet sponge while it is getting hot.
6. After use: unplug the iron and let it cool down naturally.
Mini flat iron item 0210
Ironing
This mini flat iron enables you to iron material, dolls' clothes, seams on patchworks and other
fabrics very easily. Always pay attention to the temperature of the device. It should never
burn your chosen material. In order to prevent burning from happening, we advise using a
slightly wet cloth underneath the material.
It's as easy as this:
1.) Select the attachment (large or small) that matches best with your chosen material and
affix the attachment to the screw head of the device. Ensure that the fitting is sufficiently
secured, if necessary retighten screw.
2.) Plug the device into an outlet and wait 3-4 minutes until the device has reached its best
working temperature.
3.) Put a slightly wet cloth on top of the material that you want to iron. For best results: Lightly
press device onto a part of the material. Try to avoid ironing tucking into material.
Iron appliqués onto material
Whether you like to iron fabrics, seams on patchworks or apply artistic/aesthetic appliqué to
your chosen material: it's all made easy with our device! Vliesofix® supports the decoration to
last longer on your material. In order to prevent burning of either the material or the glue from
happening, we advise using a slightly wet cloth underneath the material.
It's as easy as this:
OPERATING MANUAL:
5