S-17902, S-17903
BULLET EARPLUGS
WARNING! The earplug must be properly worn to provide effective protection.
1.
Roll to a small, crease-free
cylinder. (See Figure 1)
Figure 1
NOTE: This earplug model has satisfied the optional requirements at -4°F.
FREQUENCY (Hz)
MEAN ATTENUATION (dB)
STANDARD DEVIATION (dB)
Tested according to ANSI Specs S3.19-1974 by Michael and Assoc., State College, PA.
It is recommended that the wearer ensure that:
• The earplugs are fitted, adjusted and maintained in
accordance with the instructions.
• The earplugs are worn at all times in noisy
surroundings.
• Before use, earplugs are stored in a cool, dry place.
• After use, earplugs should be disposed of, away
from children.
WARNING! If recommendations are not
adhered to, the protection afforded by the
earplug will be severely impaired.
PAGE 1 OF 3
1-800-295-5510
uline.com
FITTING INSTRUCTIONS
2. Insert into the ear canal and
hold until plug expands.
(See Figure 2)
Figure 2
ATTENUATION DATA
125
250
500
37.3
40.8
43.1
5.9
5.3
5.0
RECOMMENDATIONS
1,000
2,000
3,150
41.6
40.7
45.6
4.8
2.8
4.2
• Keep earplugs away from small children.
• This product may be adversely affected by
certain chemical substances. If necessary, further
information should be sought from Uline.
• Corded earplugs should not be used where there is
a risk that the connecting cord could be caught up
during use.
Para Español, vea página 2.
Pour le français, consulter la page 3.
3. Remove the earplug slowly with
a twisting motion to gradually
break the seal. (See Figure 3)
Figure 3
4,000
6,300
8,000
46.2
49.4
48.3
4.2
4.4
4.5
NRR
32 dB
0721 IS-17902