How To Use; Handle Assembly - avenli 290718 Instrucciones

How to use ?

1. How to connect with charger for 290718 ?
(1) Before connection to the cleaner, firstly
connecting the charger with socket to check the
charger quality, when the light is green, the
charger is ok; Then, connecting to the cleaner, if
the light is red, it means the cleaner is charging.
Note:When the battery power completely exhausted, it is normal that the charging indicator will
be flashing for 20-50 seconds.Then the indicator will turn into red and the battery will be charging
correctly.
(2) Around 3 hours later, the light turns to green, it means the machine is full of power now.
2. How to assemble the cleaner ?
2.1 Component installation
Please assemble the machine by arrows
1

2.2 Handle assembly

The cleaner can either connect with portable
handle A, or standard telescopic poles B ( B is
not with shipment, needs to extra purchase )
2.3 Front filter assembly
Insert front filter into the body until two buttons of
body sides popping from holes of front filter. Please
keep the notch facing up.
2.4 F assembly
ilter bag
2.4.1 How to choose the correct filter bag?
(1) Large mesh filter bag
It is used for dirty pools, or plenty of rubbish into the pools, such as beginning of season, after big
shower or rainning.
(2) Fine material filter bag ( It is optional, needs to extra purchase)
It is used for small debris, such as dusts, muds.
3
2
3
6
5
A
Notch up
Button
Hole A
B