Bond 51578 El Manual Del Propietario página 6

OPERATION
To Light
1．Make sure all debris is removed from the fire pit.
2．Place a layer of dry kindling or a natural firestarter onto the center of the fire bowl.
3．Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the
width of the firebowl.
4．Use a Iong match to Iight kindling.
To Extinguish
1. AIlow fire to burn itself out.
2. Do NOT use water to extinguish as this is dangerous and can cause damage to the fire pit.
Tending The Fire
1. Using fire poker, shift coals /wood logs to allow additional airflow.
2．Wait until glowing coals have developed before adding any additional wood. If additional
wood is required, place wood on top of coals.Be careful not to shift ashes.
MAINTENANCE
This outdoor fire pit should be inspected on a regular basis to ensure product safety and long
product life.
.
Check handles to make sure they are secure (if applicable).
Check components for any signs of damage.
Wipe exterior surfaces with a mild cleaning product and water.
For stubborn surfaces use a citrus based degreaser and soft cloth.
Rinse surfaces clean of any cleaning product with water after cleaning is complete.
Remove built-up creosote from components with a chimney cleaning product.
Store fire pit in a cool dry place.
Use manufacturer-approved or supplied replacement pars and accessories only. Otherwise it
may void the warranty of this product and result in a hazardous condition.
Keep the fire pit free and clear from combustible materials and debris．
Bond Manufacturfing Co., Inc. | Page 6