Tekmar tekmarNet 2 530 Guía De Instalación Rápida página 4

8. Critical Settings (Continued)
Display
ADJUST ADJUST
SUPPLY
H1 H1
For a full list of settings and operational details, please refer to the thermostat
Installation and Operation Manual (530_D) included with compatible
tekmarNet controls or download the brochure from www.tekmarcontrols.com
®
All specifications are subject
to change without notice
Range
°F or °C
Default =
°F
Set To:
0, 1, 2, 3
Default = 1
Set To:
Hyd
(Hydronic)
or Oth
(Other)
Default =
Hydronic
Set To:
On or Off
Default =
On
Set To:
Product design, software and literature are Copyright ©2014 by tekmar Control Systems Ltd.,
A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road, Vernon, B.C.
Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650 Web Site: www.tekmarControls.com
Access
TEMPERATURE UNITS
Installer
Press the
change from °F to °C and vice
User
versa.
FAN MODE
Select how the fan should operate
together with heating and cooling.
0 = Manual operation only
Installer
1 = Operate fan with cooling only
2 = Operate fan with heating and
cooling
3 = Operate fan with heating only
HEATING TERMINAL TYPE
Select if the heating for this zone
is hydronic or non-hydronic (other).
Installer
Available when:
• A reset control is present on
the tekmarNet
HEAT SUPPLY PUMP
During heating, select whether or
not the system supply pump should
turn on or be off to allow a zone
group pump per manifold.
Installer
Available when:
• A reset control is present on
the tekmarNet
Heating terminal type is set to
Hydronic.
4
Description
or the button to
® system.
system AND
®
530_Q - 02/14.