Descargar Imprimir esta página

Yakima RoadShower 4G, RoadShower 7G Guia De Inicio Rapido página 3

Publicidad

1
INSTALL THE ON/OFF ELBOW.
Install the on/off
elbow to the tank
and firmly tighten
it using a wrench.
Do not overtighten.
Check for leaks once
the tank is filled and
retighten if necessary.
2
INSTALL THE NOZZLE.
Install the nozzle
to the other end of
the hose and firmly
tighten (hand
tighten only).
4
STOW THE HOSE AND APPLY THE THERMOMETER.
Snap the hose into the clips and use the velcro® straps to secure it in place.
Then remove the backing from the adhesive of the thermometer and place
the thermometer directly on the tank in the position of your choice.
Always check the thermometer
and test the water on your
hand to avoid being scalded.
Instruction #1036081B - page 3 of 12
ASSEMBLY
3
ATTACH THE HOSE TO SPIGOT.
Press the
quick release
connector into
on/off elbow
on the tank.
61
64 68 72 75 79 82 88 90 93 97 100 104 108 111 115 118
F
C
16 18 20 22 24 28 30 32 34 36 38 40 42 44 46 48 50 52

Publicidad

loading

Productos relacionados para Yakima RoadShower 4G, RoadShower 7G

Este manual también es adecuado para:

Roadshower 10g