Operating Modes - AVM Fritz!Repeater 3000 Configuración Y Operación

Security
• Operate the FRITZ! Repeater 3000 in a dry place that is free of dust and protected
from direct sunlight, and provide for suffi cient ventilation.
• The FRITZ!Repeater 3000 is intended for indoor use only. Never let liquids get inside
the housing.
• Connect the FRITZ!Repeater 3000 to an easily accessible outlet.
• Do not open the FRITZ!Repeater 3000 housing. Opening and/or repairing the device
can present a hazard.
• Unplug the FRITZ!Repeater 3000 from the outlet before cleaning. Clean the device
using a moist cloth.

Operating Modes

The FRITZ!Repeater 3000 can work in two diff erent operanting modes:
Wireless Bridge (Preset)
In "wireless bridge" access mode, the FRITZ!Repeater 3000 and your FRITZ!Box (rou-
ter) are connected via wireless LAN. The FRITZ!Repeater can expand the network by
off ering connections to computers and other network devices via wireless LAN or LAN
cable. Continue reading on page 8.
N 1
FO
6
WiFi
WiFi
LAN
LAN Bridge
In "LAN bridge" access mode, a cabled connection is provided by connecting the
FRITZ!Repeater 3000 and your FRITZ!Box (router) with a LAN cable. The FRITZ!Repeater
can expand the network by off ering wireless and cabled connections to computers and
other network devices.
If you would like to connect the repeater with your FRITZ!Box (router) by cable, confi gure "LAN
bridge" access mode in the user interface of the FRITZ!Repeater 3000. Continue reading on
page 11.
N 1
FO
WiFi
LAN
7