IVAC Pro R115240NA Guia Del Usuario página 5

operate on one of four System Addresses and
one of eight Tool Addresses, similar to an 'iVAC
Pro Tool'. (Refer to iVAC Pro System User Guide
supplied with the iVAC Pro Switch)
The iVAC Pro Remote is housed in a plastic case
90mm x 70mm x 25mm.
An easily attached belt clip is also provided.
The rear cover is attached by three screws.
Removing the cover allows access to the
batteries and the DIP Program Switch.
This allows the batteries to be changed and
also to program address functions of the 'iVAC
Pro Remote' by means of the six position DIP
Program Switch.
There are two address functions, System Address
and Tool Address.