Operation - i-Star 90043PI Manual Del Usuario

Re-connecting to a paired device
Each time the mic is turned on, there are two possible outcomes. The mic will
connect automatically to the last connected device, just press play on your de-
vice for playback. The mic will be listed on your devices screen as an available
output channel, select the mic as the output channel and play your music.

Operation

Power ON/OFF, Magic Voice Effect and LED ON/OFF
button (6) to switch on the mic, the ear LEDs
Press and hold down the
(3) will flash. If the mic is already paired to a Bluetooth device you will hear the
messages "Bluetooth mode" and then "connected". Once on, press and hold
button (6) to switch the mic off (you will hear a 4 beat tone
down the
and the ear LEDs (3) will flash).
To save battery power switch off the mic when it is not in use.
Magic voice effects: There are 4 magic voice effects, press the
button
(6) twice to activate the first magic voice effect, press again to change to the
next magic voice effect. To exit the magic voice effect mode press the
button (6) twice.
button (6) to switch ear LEDs (3) On/Off.
Short press
Backing track playback from Bluetooth or micro SD card
Once you have a successful Bluetooth connection you can select and start
playback of backing tracks stored on the Bluetooth device using the device's
controls. Alternatively you can play MP3 backing tracks loaded on to a micro
SD card, insert the card into the micro SD card slot (13) and you will hear the
message "SD card mode" and the tracks will start playing automatically.
Once you have started playing a backing track use the
Previous/
Next buttons (7, 8, 9) to select and play the tracks you want in
Pause/
both micro SD card mode and Bluetooth mode.
When an micro SD card is loaded the mic switches to micro SD card mode
automatically, press the
/M Pause button (8) twice to switch to Bluetooth
mode, press twice again to switch back to micro SD card.
Backing track volume
button (7) to reduce the volume
Press and hold down the speaker
of the backing track, press and hold down the speaker
button (9) to
increase the volume of the backing track.
Voice volume
Sing/speak into the top of the microphone grille adjusting the mic to mouth
distance and the Mic Input Vol +/- (5) slider switch to get the correct volume.
5
www.philex.com
WIRELESS KARAOKE MIC - User Guide