Brandson Equipment 304302 Manual Del Usuario página 13

Manual mode
• The manual mode is activated when the lock switch is in the "locked" position,
to position the device at various angles and project straight lines. The laser
beam flashes every 5 seconds.
Brightness mode
Standard
Is activated as soon as the device is switched on.
Outdoor
The device has to be in "unlocked" position to increase the brightness of the laser.
The brightness of the laser can be changed by pressing and holding the ON/OFF/
Mode button for 2 seconds. All the laser beams displayed flash 5 times quickly to
warn the user.
Pressing and holding the ON/OFF/Mode button once again for 2 seconds deacti-
vates the outdoor mode. The user is warned again by five flashes.
The brightness of the laser remains the same if the position of the lock switch is
changed.
Note: The outdoor mode enables the laser detector to be used in bright surround-
ings or if the working distances are large.
Laser display modes
You can navigate through the different display modes by pressing the ON/OFF/
Mode button. You have the option to display the horizontal line, vertical line, or
both the lines.
English
13