Tannoy CMS 3.0 Serie Manual Del Usuario página 56

110 CMS 3.0 Series
Painting
If desired, the grille and baffle panel may be painted to match the surrounding décor.
Painting the baffle:
• Carefully mask off the driver assembly using the paint mask provided to ensure that the paint does not come into contact with the cone and roll surround.
• Apply several thin coats of paint – this will provide a better finish than one overly thick coat.
Painting the grille:
• Carefully remove the acoustically transparent grille cloth from the reverse side of the grille.
• Paint the grille and then replace the grille cloth - several thin coats of paint will provide a better finish than one overly thick coat.
• Re-bond the grille cloth to the grille over the entire area using a light spray-adhesive to avoid audible resonances.
CMS Series Model Dimensions
CMS 803DC BM
Hole Cut-out Size: 295 mm
Tamaño de corte del orificio: 295 mm
Taille de la découpe du trou: 295 mm
Lochausschnitt Größe: 295 mm
Tamanho do recorte do furo: 295 mm
Dimensione del ritaglio del foro: 295 mm
Gat uitgesneden grootte: 295 mm
Hålsskuren storlek: 295 mm
Rozmiar wycięcia w otworze: 295 mm
327.7
310.5
[12.90"]
[12.22"]
5.2
[0.20"]
319.0
286.4
[12.56"] [11.27"]
CMS 803DC PI
Hole Cut-out Size: 295 mm
Tamaño de corte del orificio: 295 mm
Taille de la découpe du trou: 295 mm
Lochausschnitt Größe: 295 mm
Tamanho do recorte do furo: 295 mm
Dimensione del ritaglio del foro: 295 mm
Gat uitgesneden grootte: 295 mm
Hålsskuren storlek: 295 mm
Rozmiar wycięcia w otworze: 295 mm
125.6
[4.94"]
5.2
[0.20"]
286.4
319.0
[11.27"]
[12.56"]
Quick Start Guide 111