H-7798
STANDARD BLUETOOTH
PADLOCK
UNLOCK WITH KEYPAD
1.
Enter Primary Code by pressing
the corresponding directions on
lock keypad.
NOTE: Do not pull on the
shackle when entering
code.
2. When lock lights green, open
within five seconds or it will relock.
UNLOCK WITH MOBILE DEVICE
1.
On mobile device, visit app store and download the
free Master Lock Vault eLocks app.
2. Follow prompts to log into, or create, a Master Lock
Vault account.
3. In Master Lock Vault eLocks app, press Add a Lock (+).
4. Enter Activation Code to register lock and follow
instructions to connect mobile device to lock.
5. Press any button on lock keypad to wake up
lock and prompt it to communicate with your mobile
device.
NOTE: Lock is now in Touch Unlock mode.
Recalibrate the phone-to-lock communication
range in the app settings.
LED KEYPAD INDICATORS
BLUE
GREEN
Open or
Locked,
unlocked and
communicating,
waiting to be
or keypad entry
opened
PAGE 1 OF 3
1-800-295-5510
uline.com
USAGE
YELLOW
RED
Invalid
Low battery
keypad entry
HOW TO UNLOCK WITH EXTERNAL BATTERY
1.
If battery dies in locked position, pull
battery drawer out part way to expose
jump contact point. (See Figure 1)
NOTE: Do not force the drawer
open any further.
2. Hold a new CR2450 battery in the slot
with positive (+) side of battery facing
the front of the lock. (See Figure 2)
3. If in Touch Unlock mode, hold the
battery in place with authorized mobile
device within range and press any
keypad button on the lock. If it does
not unlock, enter primary code on
lock keypad.
4. When unlocked, pull out battery
drawer and install a new CR2450
battery. (See Figure 3)
BATTERY REPLACEMENT
1.
Lock will light yellow to indicate a
low battery.
2. Unlock and open the lock.
3. Pull out battery drawer and remove
old battery. (See Figure 4)
4. Install a new CR2450 battery with
positive (+) side facing the back of
the lock. (See Figure 5)
5. Close battery drawer.
Para Español, vea página 2.
Pour le français, consulter la page 3.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
0521 IH-7798