Installation - Russell Hobbs RHCLRF17-EU Manual Del Usario

Mini enfriador
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Installation

• The unit should be kept away from direct sunlight.
• Remove all transport tapes and foam protection pieces. Clean the
interior of the appliance with a cloth dampened in lukewarm soap and
water. Wipe with clear water and wipe dry.
• When the appliance has been positioned, adjust the two front feet to
ensure the unit is stable. This is essential to ensure quiet running and
proper door opening /closing. See figure below.
• Plug in the cooler and adjust the temperature to the required level by
using the temperature adjustment dial as shown on page 5. Close the
door.
• Leave the appliance for a minimum of 3 hours for the correct
temperature to be reached before placing anything inside.
8

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Rhclrf17-b-eu

Tabla de contenido