Connect The Hardware - TP-Link Archer VR900 Guia De Inicio Rapido

English

Connect the Hardware

If you don't need the phone service, just
skip step 1 and directly connect the modem
router to the phone jack with a phone cable.
Connect the DSL splitter
1
to the phone jack.
Phone Jack
DSL Splitter
Connect to the phone (Optional)
6
Modem Router
Connect the modem
2
router to the DSL splitter.
Turn on the modem
3
router.
Verify that the following LEDs are on
4
and stable before continuing with the
configuration.
Power On DSL On
Note: The DSL LED takes about 1 to 2
minutes to stabilize.
Power adapter