iLO DTV2784 Manual Del Usuario página 11

Connections to other equipment
To connect the TV to a DVD player/Satellite receiver
If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.
To S-Video OUT
To connect the TV to a DVD player with component video
If your DVD player has component video out jacks, connect your TV to a DVD player using a component video
cord. It can greatly enhance picture quality and performance.
To Audio OUT
Y P
Audio cord (not supplied)
NOTE:
This unit is only capable of displaying 480i interlaced signal when connected to a digital device with component
video outputs. If you input a 480p, 720p or 1080i signal to the component video inputs, "COMPONENT" will be
displayed on a black screen. If this screen appears, set the digital device's component output to 480i.
To connect the TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your TV to it by using a component video cord.
To Audio OUT
Y P
Audio cord (not supplied)
To Audio OUT
To AUDIO IN
Audio cord (not supplied)
S-Video cord (not supplied)
To S-VIDEO IN
To Component OUT
P
B R
Video cord (not supplied)
To COMPONENT IN
To Component OUT
P
B R
Video cord (not supplied)
To COMPONENT IN
(continued)
Rear of the TV
Rear of the TV
Rear of the TV
11