21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in rim style
Fixture*:
Bathing well:
Basin area,
55-1/4" (140.3 cm) x 23-1/2" (59.7 cm)
bottom
Basin area, top 64-1/2" (163.8 cm) x 32" (81.3 cm)
Weight
112 lbs. (50.9 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
75 gal (284.1 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template
Pump
V
120
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1042017-1-B
4-3/4" (12.1 cm)
72" (182.9 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1164
1042557-7
Hz
A
60
7.5
required
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Pump/Control
Access
42" (106.7 cm)
19-1/2"
(49.5 cm)
21"
(53.3 cm)
1-1/2" OD
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
37 lbs/square foot (178 kg/square meter) loading.
The suction line extends 4-3/4" (12.1 cm) beyond the edge of the
rim. The pump base extends 1/8" (3 mm) beyond the edge of the
rim. Modify the framing as needed.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
1-1/2"
(3.8 cm)
Drop-In Rim Detail
120 V, 15 A, 60 Hz
Kohler Co.