How To; Adjust The Volume (Cibs Neck Loop); Adjust The Sensitivity/Strength Of The Microphone; Switch Between Microphones - Commidt CIBS PERSONAL LISTENER Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
NO

How to...

EN
EN
...

adjust the volume (CIBS Neck Loop)

F
The volume can be adjusted in stages (press for each volume level)
or by pressing the volume button
D
desired direction until the desired volume level has been reached.
You will hear a signal when the volume has reached the lowest or
highest level.
NL
The CIBS Neck Loop remembers its last volume position, so that
when switched off and on it will start at the same volume position.
ES
...

adjust the sensitivity/strength of the microphone

The sensitivity/strength can be adjusted in stages (press for each
SE
level) or by holding the volume button
desired direction until the desired level has been achieved.
DK
The Liberto remembers its last volume position, so that when it is
switched off and on, it will start at the same volume position.
SU
...

switch between microphones

You can switch between two different microphones.
The omni-directional microphone
tions. The directional microphone
direction and reduces background noise.
When using the directional microphone
towards the sound source you wish to hear
(see page 2 to see where the microphones is placed)
Switch between the microphones by setting the microphone source
button to the desired position.
13
...

establish speech connection

Establish connection from the CIBS Neck Loop
-
Switch on the Liberto (see page 8 for instructions)
-
Switch on the CIBS Neck Loop.
-
The CIBS Neck Loop will then search for the Liberto.
-
The CIBS Neck Loop will establish a connection with the Liberto.
You will see this when the status lamp
illuminates solid yellow.
Establish connection from the Liberto
-
Switch on the Liberto (see page 8 for instructions)
-
Switch on the CIBS Neck Loop.
-
Press the talk button
-
The Liberto will search for your CIBS Neck Loop
-
The Liberto will establish a connection with the CIBS Neck Loop.
You will see this when the status lamp
solid yellow.
10
All manuals and user guides at all-guides.com
.
10
User manual CIBS Personal Listener (NO_GB_F_D_NL_ES_SE_DK_SU) 1f
on the CIBS Neck Loop in the
1
on the Liberto in the
18
captures sound from all direc-
captures sound from just one
, it must be pointed
on the Liberto
12
on Liberto illuminates
12

Publicidad

Tabla de contenido
loading

Tabla de contenido