Resumen de contenidos para Black and Decker ProFinish X700 Serie
Página 1
® SAVE THIS USE AND CARE BOOK LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION ProFinish ™ Premium Irons Planchas de primera Fers de qualité U.S.A./CANADA 1-800-231-9786 Household Products Limited de México S. de R.L. de C.V. MEXICO 01-800-714-2503 1200W 120V~...
IMPORTANT SAFEGUARDS When using your iron, basic safety precautions should always be fol- lowed, including the following: READ ALL INSTRUCTIONS BEFORE USING. s Use iron only for its intended use. s To protect against a risk of electric shock, do not immerse the iron in water or other liquid.
Página 3
or emptying of water and when not in use. Be careful to avoid spilling water over iron when filling. s Do not operate iron with a damaged cord or plug or if the iron has been dropped or damaged. s To avoid the risk of electric shock, do not disassemble the iron; instead, take it to an authorized service center for examination and repair.
s When using surge of steam, always direct the steam vents away from your body. s Do not operate in the presence of explosive and/or flammable fumes. s Do not use iron outdoors. s This product is for household use only not for commercial or indus- trial use.
Página 5
SAVE THESE INSTRUCTIONS POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
SERVICE OR REPAIR Service, if necessary, must be performed by a Black & Decker Company- Owned or Authorized Household Appliance Service Center. The Service Center nearest you can usually be found in the yellow pages of your phone book under "Appliances-Small". Before shipping or mailing your iron, empty all water from the iron.
Página 7
FULL ONE-YEAR WARRANTY Household Products warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the origi- nal date of consumer purchase or receipt as a gift. This warranty does not include damage to the product resulting from accident or misuse.
Página 8
ENGLISH 1. Water Fill Hole Cover 9. Push ON/OFF Button and Auto-Off Light 2. Spray Nozzle 10. Cord Wrap/Stable Heel Rest 3. Temperature Selector/Smart Steam™ Dial 11. Fabric Guide 4. Magnifying Lens 12. Water Window with FULL Mark 5. Spray Button 13.
How To Use NOTE: Before first use, remove any labels, stickers, or tags which may be attached to the body or soleplate of the iron. 1. Move the Lever to Smart Steam. Flip open the Water Fill Hole Cover. Tilt the iron slightly forward and use a measuring cup to pour water into the hole until the level reaches the FULL mark on the Water...
3. In extremely hard water areas, use tap water the first time you use the iron. Then consider using distilled or demineralized water. Once a month however, use tap water to maintain steam perfor- mance. 4. Plug in the iron. Push the ON/OFF button and a light will come on (B).
7. Push the ON/OFF button to manual- ly turn off the iron and the light will go out. If unattended, the iron will automatically shut off in 10 min- utes. Unplug the iron when fin- ished ironing. STEAM IRONING Be sure there is water in the reser- voir.
VERTICAL: (Selected models only) For best results when using vertical surge of steam, hang the garment on a clothes hanger. Curtains and drapes may also be steamed once they’re hung. Hold the iron away from your body close to but not touching the fabric.
sary to empty the water from the reservoir. IRONING TIPS • Always read garment labels and follow manufacturer's ironing instructions. • Synthetics are heat-sensitive and may glaze or melt at high temperatures. Use lower settings. If you are unsure of a garment's fiber, test a small area (on an inside seam or hem) before ironing.
cleansers, or scouring pads that may scratch or discolor the iron. 2. For models with a ✝MAGNAGLIDE™ or **SilverStone ® non-stick coated soleplate, wipe the soleplate with a damp cloth or sponge. Never use abrasives, heavy-duty cleansers, vinegar, or scouring pads. After cleaning, iron with steam over an old cloth to remove any residue from the steam vents.
3. Unplug the iron and do not allow it to cool. 4. Hold the iron in the ironing position over a sink or basin. Move the Lever to STEAM CLEAN. Rock the iron back and forth for about 30 sec- onds.
Need Help? IRON WON'T HEAT? 1. Is the iron plugged in? Is the Power Light on? Press the ON/OFF button. 2. If the light does not come on, will a lamp plugged into the outlet turn on? IRON WON'T START STEAMING? 1.