Safety Instructions; What's In The Box; Getting Started - eufy Security Floodlight Camera 2K Guia De Inicio Rapido

Safety Instructions

1. Shut off power at the fuse or circuit breaker before installing.
2. Do not install the device near flammable surfaces.
3. Must have a licensed electrician install the Floodlight Camera.
4. Do not use the device in environments where the temperature is too
high or too low, avoid exposing the device to direct sunshine or very wet
environments.
5. The suitable temperature for the product and accessories is -20°C to
50°C.

What's in the Box

Floodlight Camera 2K Junction Box
(T8424)
Central Screw Central Screw Cap
01 EN

Getting Started

1. Shut the power off at the breaker in your house. Switch on/off the
2. Determine the area you want to be lit and camera coverage is required.
Installation Hook
Plate Screws
lights to make sure the electricity in your house is properly shut off.
Install your Floodlight Camera on the front wall or on a side wall of your
house. To get optimal detection and light coverage for the floodlight and
camera, install it on a side wall if possible. *
* The motion sensor is more sensitive to movements across the camera field of view than
movements towards or away from the sensor. We highly recommend you install the
floodlight camera on the side wall.
EN 02