nVent Hoffman PROLINE Guia De Inicio Rapido página 2

INTRODUCTION
1. Before installing the incandescent fixture, read
these instructions carefully. Failure to follow these
instructions could damage the product or cause a
hazardous condition.
2. All lighting packages are designed to operate on
115 VAC, 50/60 Hz., single phase power.
- 2 - © 2018 Hoffman Enclosures Inc.
English
WARNING
To avoid electric shock and equipment damage,
disconnect any power supplies to the enclosure
before installing the light. Do not energize any
circuits before all internal and external electrical
and mechanical clearances are checked to assure
that all assembled equipment functions safely and
properly. Before drilling mounting holes, check all
mechanical and electrical clearances.
These incandescent lighting packages are not
designed for use in hazardous or wet locations.
PH 763 422 2211 • nVent.com/HOFFMAN 87569319