Publicidad
Fig 4a
Step 3. (Base Cabinets). Pre-drill 3/16 inch holes 3/8
inch down from top of cabinet and also 27-3/4" down
from top of cabinet. (See Fig 4a-d). Repeat with other
adjacent cabinet.
Fig 5a
Step 4. Mount filler cabinet oull-out to adjacent cabinet 1.
See Fig. 5a-b
Step 5. Mount filler cabinet pull-out
to adjacent cabinet 2. See Fig. 7
Fig 6
Fig 8
Step 7. Attach face frame and onlays (not provided) See Fig. 8-9
Fig 4b
Filler Cabinet
Base Cabinet
Scribe Rail Meets Face Frame
Fig 5b
Filler Cabinet
Base Cabinet
Scribe Rail Meets Face Frame
Fig 9
From inside the adjacent
cabinet screw the 432
cabinet top.
Fig 5d Wall Cabinet
Screw 432 cabinet bottom
from below adjacent cabinet.
Screw 432 cabinet top
from above adjacent
cabinet.
Fig 5c Base Cabinet
From inside and
above the adjacent
cabinet floor screw
the 432 cabinet
bottom.
Fig 7
Step 6. Remove front mounting strap.
See Fig 7.
Publicidad
