Connecting The Power Supply; Screen Display During Recording - Rollei M1 Motorrad Manual

10

Connecting the power supply

The installation can be different on different motorcycles. For
your own safety, please contact your local dealer.
Bracket
Front
Picture courtesy of: KTM Sportmotorcycle Germany GmbH
Connection method for power and GPS connection cables

Screen display during recording

1 Video mode
2 Recording time
Video resolution
3
4 Charging/Capacity
5 App Connection
6 WiFi display
7 MicroSD card display
8 GPS display
9 Clock
10 Date
Microphone
11
M1 Motorcycle Dashcam
Louis Edition
Power cable
GPS cable
11
ENGLISH
Note
• This is only an example. Please adapt the installation method to
your own motorcycle model.
• If you wish to purchase additional accessories (extension cable,
additional parts), please contact your local dealer.
• After making sure that the number of connections and assi-
gnment are correct, make sure that the cable and connector are
fully connected.
Connecting Motorcycle Power Cables
1 2 3
10 9
Rear
Connect to the
battery
(buck line)
Positive pole (ACC)
Negative pole (GND)
4
5
6
7
8