SPC RADICAL Manual De Usuario página 15

HEADSET FUNCTIONALITY
POWER ON / POWER OFF
EN
To turn the headset on hold down button (3) for four
seconds, the LED pilot light (6) will flash blue and red and
it will say "Power on".
If the headset is connected to a device, the light will start
to flash blue after several seconds. If you have still not
connected the headset with a device, the light will continue
flashing blue and red alternately.
To turn the headset off, hold down button (3) for four
seconds until the headset says "Power off".
NOTE: If the headset does not connect to any other device, after
several minutes it will turn off automatically.
15