Filter Cartridge Replacement - Culligan S-H200-C Manual Del Usuario

FILTER CARTRIDGE REPLACEMENT

• This model uses the WHR-140 filter cartridge.
• To ensure showerhead does not fall during filter change, it is
recommended that you detach it from the pivot assembly and let
it hang loosely.
1
HOLD
LOOSEN
Hold the body of the pivot
assembly firmly in one hand. With
other hand, turn the ribbed ring
behind the face counterclockwise
to unscrew.
3
REMOVE STICKERS FROM BOTH
SIDES OF NEW CARTRIDGE
BEFORE INSTALLING.
Place new filter cartridge into
position by pushing cartridge down
into cavity until seated.
2
Grasp white filter cartridge and
pull cartridge up and to the side to
remove and discard.
4
HOLD
TIGHTEN
Hold the body of the pivot
assembly firmly in one hand. With
other hand, turn the
ribbed ring behind the face
clockwise until tight.
6