Replacement Parts; Before Returning For Repairs - DieHard DH154 Manual Del Propietário

Smart Cable LED and Alarm Behavior
BEHAVIOR
Green LED flashing
Green LED solid
(with clicking sound)
Green LED solid
Red LED lit (no alarm)
Red LED lit; long buzzer alarm
NOTE: Disconnect and reconnect the smart cable to reset.
12. SPECIFICATIONS
Battery type ................................................ Lithium Polymer, 37 Wh
Peak current .............................................................................800A
Starting current .........................................................................400A
Light ................................................................... Cree
Micro USB input .....................................................................5V, 1A
USB output ..........................................................................5V, 2.1A
Cree is a registered trademark of Cree, Inc.
®

13. REPLACEMENT PARTS

USB to Micro USB charging cable .................................3899003982Z
Smart cable/clamps ........................................................3899003986Z
Bag for accessories ........................................................5899000037Z

14. BEFORE RETURNING FOR REPAIRS

When an UNKNOWN OPERATING PROBLEM arises, please read
the complete manual and call the customer service number for
information. This will usually eliminate the need for return.
If the above solutions do not eliminate the problem, or for
information about troubleshooting, call toll-free from anywhere
in the U.S.A.: 1-800-621-5485.
Ready to connect the smart cable to
the jump starter, and ready to connect
the clamps to the vehicle.
Detecting the condition of the vehicle
and jump starter.
Ready to jump start the vehicle. After
jump start, disconnect the clamps.
Voltage is too high or too low for
starting a vehicle.
The connection is reversed.
Short circuit protection.
Overload protection.
• 11 •
REASON
LED, 600 lm
®