Safety Information; Installation Instructions - allen+roth GF-18S112B Manual Del Usuario

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble or install the product.
• Three to four people are needed for assembly
• Maximum load for the roof hook: 50 lbs.
WARNING:
• Small parts like washers may pose a choking hazard to young children.
• Paint on this gazebo might peel if it is not handled properly.
• Snow load capacity: Can hold up to 2,000 lbs. (max).
CAUTION
• If heavy snow occurs, clear snow load from roof, and check for damage before continued use.
• Fasten the base to the deck (wood or concrete) for item stability.
• Do not use power tools to assemble this product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 3 - 4 hours
Tools Required for Assembly (not included): 6ft. Ladder
Tools Required for Assembly (included): Hex Wrench and Spanner

INSTALLATION INSTRUCTIONS

1. Insert the post plate cover (C) into the supporting
post (A). Fit the base plate (D) underneath the
supporting post (A). Insert two bolts (AA) into the
supporting post (A) and secure to the base plate (D)
using the hex wrench (II), but do not overtighten.
Slide the post plate cover (C) down into place.
Insert the decor moulding (B) into the supporting
post (A).
Repeat this step for the remaining supporting posts
(A), decor mouldings (B), post plate covers (C) and
base plates (D).
Hardware Used
AA Bolt 1
II Hex Wrench
1
A
D
x 8
x 1
5
B
A
C
AA
AA
C
D