Crosley XNE25J Manual Del Propietario E Instrucciones De Instalación página 19

INSTALLING THE REFRIGERATOR (Cont.)
REMOVING FRENCH DOORS
IMPORTANT NOTES
When removing french doors:
• Read the instructions all the way through before
starting.
• Handles are included inside the refrigerator.
• Place the screws by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for the
doors.
CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator
doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To eliminate the risk of electric shock or injury
during installation, you must first unplug the
refrigerator before proceeding. Failure to follow
these instructions can result in electrical shock.
Tape the doors shut with adhesive tape.
49-1000107 Rev. 0
Installation Instructions
REMOVING RIGHT DOOR
1
A. Remove the hinge cover on top of the right
fresh food door by removing the screw using
a Phillips screwdriver.
B Using a 5/16" socket ratchet/driver, remove the
bolts securing the top hinge to the cabinet. Lift
the hinge support straight up to free the hinge
pin from the socket in the top of the door.
C. Remove the tape from the right door and tilt
the door away from the cabinet. Lift the door
off the center hinge pin.
D. Set the door on a non-scratching surface with
the inside up.
2
REMOVING LEFT DOOR
A. For Ice and Water Models Only: Unplug the
water line from the back of the refrigerator
and remove all tape that fixes the water line
to the refrigerator.
19