Application Example: Fuel Oil Consumer Installation In Single Conduit System; Connections; Determination Of The Flow Rate, The Pipe Diameter, And The Pressure Loss - GOK GS Pro-Fi 3 Instrucciones Para El Montaje Y El Funcionamiento

APPLICATION EXAMPLE: FUEL OIL CONSUMER INSTALLATION IN SINGLE CONDUIT
SYSTEM

CONNECTIONS

Inlet,
optional
Outlet
DETERMINATION OF THE FLOW RATE, THE PIPE DIAMETER, AND THE PRESSURE
LOSS
Flow rate
The outlet pipe must be dimensioned pursuant to DIN 4755 in such a way that the mean flow
rate of the fuel oil is between (0.2 and 0.5) m/s. In the event of too large a pipe diameter with
low flow rates, undesired formation of gas bubbles may occur.
Part no. 13 512 53 b
Combined heating oil filter breather type GS Pro-Fi 3
Trading name and dimensions
acc. to standard
screw-in fitting
• IG G 3/8
For accepting a screw-in fitting with O-ring
• compression fitting RVS
• compr. fit. 6
Trading name and dimensions
acc. to standard
ball-cone connector
• thread AG G 3/8-KN
Membrane-controlled
anti-siphon device type
HS-V.2
Pressure
compensation valve
type DAV7
Tank withdrawal
armature type VTK-3
Suction line
Combined heating oil
filter breather
type GS Pro-Fi 3
Installation notes
Installation notes
5 / 12