Easy Home 700343 Guia De Inicio Rapido

Quick Start Guide
MULTIFUNCTION 2 IN 1 SHOWER SYSTEM
Contents
Included in the box (see Fig. A):
a. 6 function handheld showerhead
b. 6 function rain showerhead
c. 5 foot flexible hose
d. 3 way diverter
e. Thread seal tape
Note: Rubber washers are already placed where needed. Extra washers have also been provided with this unit.
To Install
1. Remove old showerhead. Clean threads with steel wool
2. Apply thread seal tape* (e) to shower arm threads. Screw diverter valve (d) onto shower arm and tighten
3. Apply thread seal tape* (e) to threads on diverter valve (d). Screw new showerhead (b) onto diverter (d)
4. Apply thread seal tape* (e) to remaining outlet on diverter valve (d). Connect hose (c) to diverter (d). Then connect handheld showerhead (a) to other
side of hose (c) (see Fig. E).
5. Insert handheld showerhead (a) unit into diverter (d) bracket by slipping hose into opening and sliding down until showerhead unit is resting in the
bracket. Use wrench or pliers to tighten all connections. Do not overtighten. Protect finish by wrapping parts with a cloth before tightening
*Apply about 2-3 turns of thread seal tape to the threads, wrapping the tape tightly in a clockwise direction and making sure that it is embedding
in the threads properly. Wrap the tape in a clockwise direction so when you screw on the new showerhead, the thread seal tape doesn't come
undone.
Changing Modes on the Showerhead
Turn control knob on side of diverter to change between (see Fig. G-H):
• Showerhead only
• Handheld only
• Showerhead and handheld
H
Showerhead only Handheld only
AFTER SALES SUPPORT 877-282-6195 (Free hotline: 10 am–6 pm EST Monday - Friday)
US
(see Fig. B).
(see Fig.
(see Fig.
Water inflow
(Shower arm)
Water outflow
(Handheld)
Showerhead and Handheld
A
B
C).
D).
(see Fig. F).
D
F
Water outflow
(Showerhead)
info@orbithome.com
C
E
G
Control
Knob
Product code: 700343 02/2020
BATHROOM
US
On-sales period:
02/2020