Compliance Information - 8BCraft RetroStone Manual De Instrucciones


If you hear a strange noise, see smoke or smell something strange, unplug the AC adapter from the socket
and contact 8BCraft Customer Support.

Do not expose devices to excessive force, fire, microwaves, high temperatures or direct sunlight. Do not pull
on cables and do not twist them too tightly.

Do not let devices come into contact with liquid and do not use them with wet or oily hands. If liquid gets
inside, stop using and contact 8BCraft Customer Support.

Do not touch device connectors with your fingers or metal objects.

Do not touch the AC adapter or connected devices while charging during a thunderstorm.

Do not disassemble or try to repair devices. If devices are damaged, stop using them and contact 8BCraft
Customer Support. Do not touch damaged areas. Avoid contact with any leaking fluid.
1.1.5 WARNING – General

Keep this system, its accessories and packaging materials away from young children. Small parts such as
plastic buttons, SD cards and packaging items may be swallowed. The cables can coil around the neck.

Do not use this system within 25 centimetres (10 inches) of a cardiac pacemaker while using wireless
communication. If you have a pacemaker or other implanted medical device, first consult a doctor.

Wireless communication may not be allowed in certain places such as aeroplanes or hospitals. Please follow
respective regulations.

Do not use excessive volume for headphones. This may damage your hearing. Keep the volume at a level at
which you can hear your surroundings. Consult a doctor if you experience symptoms such as buzzing in your
ears.
1.1.6 CAREFUL USAGE

Do not place the system in humid areas or areas where the temperature can suddenly change. If
condensation forms, turn the power off and wait until the water droplets have evaporated.

If devices become dirty, wipe them with a soft, dry cloth. Avoid using thinner, benzene or alcohol.

Be aware of your surroundings while playing.

Make sure to charge the built-in battery at least once every six months. If the battery is not used for an
extended period of time, it may become impossible to charge it.

The RetroStone is not designed to be powered from a USB port on other connected equipment, if this is
attempted it may malfunction.

All peripherals used with the RetroStone should comply with relevant standards for the country of use and
be marked accordingly to ensure that safety and performance requirements are met. These articles include
but are not limited to keyboards, monitors, and mice used in conjunction with the RetroStone.

Always shutdown RetroStone from software before switching it OFF. Not doing so might corrupt the
memory card, resulting in loss of data.
1.2 G S
ETTING
1. Charge the system.
2. Install your operating system software on the memory card. Full instructions can be found at :
http://www.8bcraft.com/retrostone-tutorial
3. Insert memory card in RetroStone.
4. Switch ON the unit.
Find full instructions at:
1.3 W
ARRANTY
To find out how to receive warranty information, see www.8bcraft.com
1.4

COMPLIANCE INFORMATION

The RetroStone complies with the relevant provisions of the RoHS Directive for the European Union. In common
with all Electrical and Electronic Equipment (EEE) the RetroStone should not be disposed of as household waste.
Alternative arrangements may apply in other jurisdictions.
TARTED
http://www.8bcraft.com/retrostone-tutorial
I
NFORMATION
5