Charge the device by connecting it
to the computer or the USB power
adaptor via the USB cable.
• The notification light turns red while
the device is being charged. The
notification light turns green when
charging is complete.
4
CP905_UM_E.indb 4
CP905_UM_E.indb 4
After fully charging, disconnect the
device from the charger. First unplug
the charger from the device, and then
unplug it from the electric socket.
• To save energy, unplug the
charger when not in use.
The charger does not have a
power switch, so you must
unplug the charger from the
electric socket when not in use
to avoid wasting power. The
charger should remain close to
the electric socket and easily
accessible while charging.
• The socket-outlet shall be
installed near the equipment
and shall be easily accessible.
Charging time and standard run
time (160 mAh)
Charging
Approx. 2 hrs
time
Standard
Approx. 120 hrs
run time
2014-02-12 오전 10:41:30
2014-02-12 오전 10:41:30