Selecting The Aspect Ratio; Setting Parental Controls - Insignia NS-10PDVDD Guia Del Usuario

07-343_NS-10PDVDD.fm Page 24 Monday, July 9, 2007 3:40 PM

Selecting the aspect ratio

When your player is connected to an TV or monitor, you can select
the aspect ratio for the TV or monitor.
To select the aspect ratio:
1 Press SETUP. The General Setup Page opens.
2 Press ENTER. TV Display is highlighted.
3 Press
4 Press
• Normal/PS–Displays the video image full-screen when your
player is connected to a standard TV.
• Normal/LB–Displays the video image with black bars at the
top and bottom when your player is connected to a standard
TV.
• Wide–Displays the video image full-screen when your player is
connected to a widescreen TV.

Setting parental controls

To set parental controls:
1 Make sure that the disc tray is empty.
2 Press SETUP. The General Setup Page opens.
3 Press
4 Press
5 Press
select and all higher ratings are blocked. You can select:
• KID SAFE (All children)
• G (General audiences)
• PG (Parental guidance suggested)
• PG 13 (Parents strongly cautioned)
• PGR (Parents very strongly cautioned)
• R (Restricted)
• NC-17 (No one under 17)
• ADULT (Adults only) (factory default)
6 Press ENTER, then enter the password. The default password is
3308.
Note
If you change the password, then forget it, enter 3308.
24
Insignia NS-10PDVDD 10" Personal DVD Player
to access the TV Display options.
or to select the aspect ratio. You can select:
or to select PREFERENCES, then press ENTER.
or to select Parental, then press ENTER.
or to select the rating you want to block. The rating you
www.insignia-products.com