Before You Begin - Barrette VINYL PRIVACY GATES Instrucciones De Instalación

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.

BEFORE YOU BEGIN:

Vinyl gate posts require an internal support
system for weight-bearing purposes
therefore a post stiffener is required. Post
stiffener needs to be purchased separately.
Fence
Top View of Routed Post
NOTE: Components shown are for visual reference only and may not depict the exact style of
your product. Please see product label for correct number of pieces.
Lattice Top Gate
Component list:
Description
Lattice
Boards
Top Rail
Middle Rail
Bottom Rail
Gate Uprights
Upright Inserts
Upright Caps
Screws
Lattice Channels
Vinyl Cement
Hinges
U-Channels*
*NOTE: Not all vinyl privacy gates
include U-Channels.
To obtain and review a copy of the warranty please visit barretteoutdoorliving.com. You may also contact
us at 1-800-336 2383 or email Cs.outdoorliving@ebarrette.com
2
Purchased
Stiffener
Upright
Inserts
Hinges
Screws
TOOLS/MATERIALS NEEDED:
Phillips Screwdriver
Safety Glasses
Line Level
Tape Measure
Drill
#2 Square Drive Bit
Gate Hardware (Latch)
2" Wood Blocks
Lattice Top
Lattice
U-Channels* U-Channels*
Boards Boards
Vinyl
Cement
Lattice Channels
Upright
Cap
Top Rail
Middle Rail
Bottom Rail
Gate
Upright