Preventive Maintenance Tabele; Equipment Identification - Spheros CityVent Manual Del Proprietário

Preventive maintenance
4.4 PREVENTIVE MAINTENANCE TABLE
1 - Clean the air outlet with compressed air
QUARTERLY
2 - Test the operation and check the air flow
1 - Perform the quarterly preventive maintenance routines
2 - Clean the equipment to remove dirt deposited on the
components: cover; fan and air outlet.
EVERY SIX
3 - Measure the blower current consumption. (check the air flow)
MONTHS
4 - Tighten all screws of the unit, observing the applied
torques.
1 - Perform the every six months preventive maintenance routines
ANNUAL 2 - Visually check the equipment if it show: loose,
damage or broken parts, with sings of wear, rust,
deterioration and friction with the body.
All preventive manintenance described in this manual is considered for
operating under normal conditions. If the conditions be other than expected
and environmental contamination a possibility, the frequency of actions must
be more intense.
Note: We recommend using this table to develop a plan of periodic maintenence to your
vehicles.

4.5 EQUIPMENT IDENTIFICATION

It is extremely important, when ordering spare parts and sending other
correspondences, that the customer identifies the air conditioner model,
mentioning serial number, model and manufacturing date.
This information can be found on the equipment's warranty certificate and on
the identification tag.
Information regarding the application such as: body serial number and model;
chassi serial number and model, are also important to identify the spare parts
that comprise the equipment. To identify the body and the chassi, their
manuals should be consulted.
SPHEROS CLIMATIZAÇÃO DO BRASIL SA
AV. RIO BRANCO NRO 4688 - B SÃO CRISTÓVÃO
95060-650 - CAXIAS DO SUL - RS - BRASIL
Fone (54) 2101 5700 Fax 9540 2101 5747
E-mail: spheros@spheros.com.br
Equipmento
R
Model........: City
Vent
Ref. Number..: 000-00000-000
Serial Number: 99999999999
Date.........: 00/00/00
15