Famastil F-Power P2167.036 Manual De Instrucciones página 24

WARNING! Do not leave the battery charging for more than 10 hours.
This can damage it and cause accidents.
SWITCHING ON AND OFF
To turn on the Screwdriver, only
press the trigger accorging to the
necessary rotation direction. To turn the
Screwdirver off, only release the trigger.
BUILT-IN LED
To start the LED lighting, push the button in
the top of the screwdriver as shown in PIC 2.
DIRECTION OF ROTATION
This Screwdriver is equipped with a
double side rotation system (PIC 3):
To make the rotation in the clockwise
way, press the trigger in its bottom part.
To make the rotation in the anti
clockwise way, press the trigger in the
upper part.
INSERTING AND REMOVING BITS
• To install a hex shank screwdriver bit
or drill bit, simply insert it into the cavity
in the hex spindle until it snaps into
place as shown in PIC 4.
• The interior of the F-Power Screwdriver
chuck has a magnet to anchor the bit to
the chuck.
• To remove the bit pull it straight out.
All manuals and user guides at all-guides.com
CLOCKWISE WAY
CLOCKWISE WAY
LED ON LED OFF
ANTI
PIC 2
PIC 3
PIC 4
25