Cleaning & Maintenance - Cognex VisionView Manual Del Usuario

Support
VisionView software instructions are presented in detail in the VisionView
which is included on the VisionView DVD and available for download from the
VisionView support site: http://www.cognex.com/Support/VisionView.
Note:
Cables are sold separately.
l
If any of the standard components appear to be missing or damaged,
l
immediately contact your Cognex Authorized Service Provider (ASP)
or Cognex Technical Support.
Cleaning/Maintenance
Use a micro-fiber cleaning cloth to quickly remove smudges and fingerprints from
VisionView. Be sure to first remove large dirt particles with clean, compressed air, a
camel hair brush or brush the surface lightly with the cloth.
Use alcohol (ethyl, methyl or isopropyl) to remove stubborn residue from the touch
screen surface. Do not pour alcohol directly on the screen surface, but apply to the
cloth first; if alcohol soaks into the joint of upper film and bottom glass, peeling and
defective operation may occur. Wipe dry with a clean/dry section of the cloth.
Note:
Attempting to clean the touch screen with a sharp object, such as a
l
fingernail, may cause transparent conductive cracks in the touch
screen.
Do not attempt to clean VisionView using glass cleaner, manicure
l
remover (toluene), benzine or other organic solvents or cleaners.
4
®
Help file,