Tabla de contenido
Publicidad
2.1 Camera Installation
Ÿ Using one of the included network cables, connect the TV-IP320PI cameras to any of the PoE network ports on the TV-NVR104.
The TV-NVR104 provides power to the TV-IP320PI cameras.
PoE network
port
PoE network
port
2.2 Connect the Power
1. Connect the 48V DC power adapter to the TV-NVR104 power port.
2. Connect the power cable to the power adapter.
3. Plug the power cable into a power source.
4. (Optional) Connect the grounding point to a ground wire.
(Included Ethernet cable)
(Included Ethernet cable)
3
Publicidad
Tabla de contenido
