Dimensional Drawings - Eneo VKC-1327A/VAR49 Instrucciones De Instalación Y Funcionamiento

4.6 Function switches (4)
SW ON
No Function
1.
Operates in internal sync.
Int / Line-Lock
mode regardless of the power
supply type
2. ELC / ALC
ELC mode. Linear electronic
shutter is operating
3. BLC BLC ON: Back light
compensation is enabled
4. AGC Turbo
AGC Turbo ON
5. Flickerless
Flickerless mode is enabled
6. Sharpness
Sharpness enhancement is
enabled
7. Day/Night Day-Night mode is enabled
8. IR mode Iteration Reduction (IR) mode
is enabled and reduces a
possible iteration between
DAY and NIGHT under a
certain condition
5. Power supply and synchronization mode
Either 12VDC or 24VAC can be supplied and It does NOT require the polarity-
matched connection for 12VDC supply. Primary and secondary grounds are
completely isolated to remove the possible ground-loop problems.
Its excellently wide operating voltage range of 10.5V-30V for DC and 12-28.8V.
Synchronization mode is determined automatically by the type of power supply if
INT/LL switch is set to OFF position. Sync. mode is INT. when 12VDC is supplied
and Line-Lock when 24VAC is supplied. But sync. mode is fixed to INT if INT/LL
switch is set to ON position regardless of the type of power supply.
6. Specifications
Type
Art. No.
System
Video standard
Sensor size
Imager
Active picture elements
Synchronization
Signal-to-noise ratio
Gamma correction
Horizontal resolution
Sensitivity
(at 50% video signal)
Automatic electronic shutter
(ESC)
Low Speed Shutter
Automatic gain control (AGC)
Digital Noise Reduction (DNR) no
White balance
Backlight compensation
Wide Dynamic Range (WDR)
IR cut filter
Internal adjustments
Video outputs
OFF
Operates in Line-Lock mode
if 24VAC is supplied
ALC mode when an auto iris
lens is installed
BLC OFF: Back light
compensation is disabled
Normal AGC gain
Flickerless mode is disabled.
Sharpness enhancement is
disabled
Day-Night mode is disabled
Iteration Reduction (IR) mode
OFF. Set to OFF when NO
iteration is expected
VKC-1327A/VAR49
92154
Day & night
CCIR/PAL
1/3"
CCD, Sony Super HAD Interline Transfer
440,000, 752(H) x 582(V)
Internal/AC Line-lock
48dB
0.45
540 TVL
0.5Lux (0.32Lux), Colour, 0.24Lux (0.15Lux),
B&W at F1.2 each (AGC-Turbo).
Videor measurement result
1/50~1/100,000sec.
no
Normal/Turbo (+6dB)
Automatic (2000K - 8000K)
BLC, ON/OFF switchable
no
Switchable
8 Dip switches: Internal/Line-lock synchroni-
zation, ELC/ALC (Shutter/Auto-Iris), BLC ON/
OFF, AGC Normal/Turbo, Flickerless ON/OFF,
Sharpness Normal/Sharp, Day/Night mode
Enabled/Disabled, IR mode ON/OFF (Iteration
reduction between day and night position).
2 Potentiometers: Level for DC controlled iris,
V. phase adjustment (220° min. adjustable)
CVBS
Lens type
Lens
Aspherical technology
Focal length
Horizontal angle of view
Iris control
MOD (Min. object distance)
Filter screw size
Illumination
Serial interfaces
External connections
Mounting
Protection rating
Supply voltage
Power consumption
Temperature range
(operation)
Housing
Hidden cable management
Weight
Certificates
Optional Accessory
Art. No. Type Description
70536 VT-PS12DC-9
Plug-in Power Supply Unit 100-240VAC 12VDC
(1.0Amp), regulated, with open ends

7. Dimensional Drawings

37.9
34.4
69.1
eneo is a registered trademark of Videor E. Hartig GmbH
®
Exclusive distribution through specialised trade channels only.
Videor E. Hartig GmbH
Carl-Zeiss-Straße 8 · 63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0 · Fax +49 (0) 6074 / 888-100
www.videor.com
Varifocal
F1.2/F2.0 ~360/3.8~9.5mm
with galvanometer controlled iris
yes
3,8 mm - 9.5mm
74.2° - 30°
DC
0,15m
Not available
no
no
Video (BNC), Power (2-pin screw terminal)
Adapter plate supplied (see drawing)
–
12VDC, 24VAC (10.5~30VDC, 12~29VAC)
5.5watts
-10°~+50°C
Without housing
no
Approx. 60g
CE
51
Dimensions: mm
Technical changes reserved
© Copyright by Videor E. Hartig GmbH
04/2010