Sengled C01-BR30NA AMP Manual De Instrucciones página 2

Standard 3.5mm Line Out
Power button
Power Indicator: [ON] when the device is powered on.
Wireless Connection Indicator:
[ON – not blinking] when the device is connected to the Master Bulb;
[ON – blinking] the device is waiting to be configured via the Pulse App.
3.5mm Line Out Indicator:
[ON – not blinking] when a 3.5mm auxiliary cable is plugged into the device;
[OFF] when a cable is not connected.
HOW TO CONNECT PULSE AMP TO A MASTER BULB
WARNING - TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, USE IN DRY LOCATIONS ONLY AND DO
NOT EXPOSE TO RAIN OR LIQUIDS.
WARNING - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE BACK COVER OR TAKE APART.
THERE ARE NO SERVICEABLE PARTS INSIDE.
1. Successfully configure Pulse (C01-BR30) bulbs (Master + AMP) before installing Pulse Amp
2. On your smart device, turn on Bluetooth and connect to the Pulse Master bulb
3. Plug in Pulse Amp near your subwoofer; Power on Pulse Amp and your subwoofer
4. Launch the Pulse App on your device
5. Select the "Add AMP" tab in the Settings menu
6. Select one of two methods to add the Pulse Amp to the Pulse speaker network:
i. Select "Scan" to automatically scan the network, or
ii. Manually type the "AD Code" as printed on the back of the Pulse Amp device
NOTE: The AD code in QR format is labeled in two locations: The bottom side of the AMP
packaging (near the bar code) and on the product itself.
7. Once the scanning is successful, select the "Link" option. Amp will then connect to the Master bulb
after approximately 30 seconds. Do not turn any devices off during this process.
8. Pulse Amp should begin to blink, indicating that it has successfully connected to the Master bulb.
Now you are able to enjoy Pulse wireless speakers supported with bass from your own subwoofer.