Accesories; Installation - Selecta L-3 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80140 REV C
4903000
J
.P. SELECTA s.a.u.
J
.P. SELECTA s.a.
adjusting nut on the glass thread and connect to the base of the furniture
(14).
The water supply, will be made by a 3/4" GAS thread tap (type washing-
machine), where the filter and the thread (2) of the union tube will be

ACCESORIES

placed. The zone (4) is connected to the thread of the water entry (5)
located on the base (14).
Description
• Polyethylene reservoir up to 50L.
• Decalcifier
Connect the mains wire (14) to the power supply.

INSTALLATION

The frequency of the cleaning is proportional to the salts, metals, lime or
other elements that may be found in the used water. We recommend you
Assembly the heather element, put it into the glass part (10), thread
to incorporate a decalcifier between point 1 and 2, in order to reduce the
the adjusting nut on the glass thread and connect to the base of the
risk of breaking of the heating element and to lengthen the time of cleaning.
furniture (14).
The water supply, will be made by a 3/4" GAS thread tap (type washing-
machine), where the filter and the thread (2) of the union tube will be
Never use the heating element connector to move the distiller. The
placed. The zone (4) is connected to the thread of the water entry (5)
heating element can be broken.
located on the base (14).
Connect the mains wire (14) to the power supply.
The frequency of the cleaning is proportional to the salts, metals, lime
or other elements that may be found in the used water. We recommend
you to incorporate a decalcifier between point 1 and 2, in order to reduce
the risk of breaking of the heating element and to lengthen the time of
cleaning.
Never use the heating element connector to move the distiller. The
heating element can be broken.
Be sure that the voltage supply matches the indicated on the
characteristicsplate.
Do not use the equipment if it is NOT EARTHED.
If you have to change the plug, bear in mind that the yellow/green
Be sure that the voltage supply matches the power indicated on
cable is the protective earth and it is conected into the metallic
the characteristics plate.
envelope of the equipment.
Do not use the equipment if it is NOT EARTHED.
If you have to change the plug, bear in mind that the yellow/green
cable is the protective earth and it is conected into the metallic
envelope of the equipment.
Tensión/Voltage Magnetotérmico/Break circuit
230 V
115 V
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
16 A
32 A
06/2020 Pag.: 9
Code
5903050
703052
Diferencial/Differential
16 A/30 mA
32 A/30 mA
Tel (34 3) 770 08 77 Fax (34 3) 770 23 62
Tel (34 3) 770 08 77 Fax (34 3) 770 23 62