Husky HDS126 Instrucciones De Operación

See Warranty on page 5 for important information about commercial use of this product.
Operating Instructions
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
Siphon-feed sandblasters are designed
for cleaning and removing rust, scale,
and paint. It is the ideal method for
stripping, polishing and etching
projects. This equipment can be used
with sand, abrasive powders, water and
other liquids.
Specifications
Nozzle Material . . . . . . . . . . .Ceramic
Nozzle Size . . . . . . . . . . . . . . . . .3/16"
Max. psi . . . . . . . . . . . . . . . . . . . . .125
Cont. Use Air Req. (SCFM)
@ 40 psi . . . . . . . . . . . . . . . . . . . . .4.4
@ 90 psi . . . . . . . . . . . . . . . . . . . . .9.6
@ 125 psi . . . . . . . . . . . . . . . . . . .12.4
Air Inlet . . . . . . . . . . . . . . . . . . . . .1/4"
Safety Guidelines
This manual contains information that
is very important to know and
understand. This information is
provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help
recognize this information, observe the
following symbols.
Danger indicates
DANGER
!
an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates
WARNING
!
a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Caution indicates a
CAUTION
!
potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Notice indicates
NOTICE
important
information, that if not followed, may
cause damage to equipment.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2002
Siphon-Feed
Sandblaster
Unpacking
After unpacking the sandblasting kit,
carefully inspect for any damage that
may have occurred during transit. Check
for loose, missing or damaged parts.
General Safety
Information
CALIFORNIA PROPOSITION 65
DANGER
!
You can create dust when
you cut, sand, drill or grind
materials such as wood,
paint, metal, concrete,
cement, or other masonry. This dust
often contains chemicals known to
cause cancer, birth defects, or other
reproductive harm. Wear protective
gear.
Do not misuse this
WARNING
!
product. Excessive
exposure to vibration, work in
awkward positions, and repetitive
work motions can cause injury to hands
and arms. Stop using any tool if
discomfort, numbness, tingling or pain
occur, and consult a physician.
1. Read this instruction manual before
connecting this device to the
compressor.
2. Safety glasses or face shield, gloves
and a NIOSH approved respirator
must be worn during operation.
Always work in a well ventilated
area.
Figure 1
3. During operation, do not expose
the hands or skin directly in the line
of the blast nozzle.
4. After installation, inspect to make
sure all components seal properly.
5. Keep children away at all times. All
visitors must be kept a safe distance
and wear safety glasses, gloves and
a respirator.
6. Do not exceed the maximum
operating pressure of the
sandblasting equipment (125 psi).
Disconnect the
WARNING
!
sandblaster from
the air supply before changing
accessories or attempting to install,
service, relocate or perform any
maintenance.
7. Check hoses and air lines for weak
or worn condition before each use.
Make sure all connections are
secure before use.
Do not point the
WARNING
!
sandblast gun at
anyone or objects other than the
intended work object.
8. Do not depress the trigger when
connecting the air supply hose.
Do not work
DANGER
!
around oily rags or
flammable liquids. Sand striking metal
can cause a spark and create a fire or
explosion.
Figure 2
IN284900AV 11/02
HDS126