marklin 20997 Manual Del Usario página 10

Uncoupling with Relex Couplers or Close Couplers
Run the cars with these couplers over the uncoupler track
1
final parking position , change the direction of travel for the locomotive, and move it away
3
leave the car standing directly on the uncoupler track
track and moving the locomotive away
In the case of locomotives with simple hook couplers, the car can only be uncoupled when it is standing directly on the
uncoupler track.
1
1
10
2a
from the car during the uncoupling process.
3a
2
2a
. Activate the uncoupler track. After that push the car to its
2
by changing the direction of travel before activating the uncoupler
3
3a
from the car. You can also
4
4