DOREL ASIA Monbebe DA1421B4 Manual De Instrucciones página 10

EVERETT 4-IN-1 CONVERTIBLE CRIB
WARNINGS:
* ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY
51-5/8 INCHES (69CM BY 131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES
(15CM).
* The toddler bed or day bed is not intended for children under 15 months of age or over
50 lbs (22.7 kgs).
STEP 1: Detach the front panel (D) from the side panels (B & C) with Allen key (2).
STEP 2: If mattress support (F) is not in the lowest position, unscrew mattress support bolts
and spring washers (6) from left & right side panels (B & C) and move to the
lowest position.
STEP 3: Attach bottom rail (E) to side panels (B & C) using wood dowels (1), bolts (7) and
spring washers (5). Use Allen key (2) to tighten all bolts.
STEP 4: Ensure all bolts are tightly secured.
STEP 1: Follow steps 2 and 3 of the crib assembly instruction. (Omitting the front panel (D))
STEP 2: Follow steps 2 to 4 for the day bed assembly instruction located above (starting from crib).
1
DAY BED ASSEMBLY: STARTING FROM CRIB
DAY BED ASSEMBLY: STARTING FROM SCRATCH
DA1421B4
5
7
E
7