WARNINGS:
* Any mattress used in this crib must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm)
with a thickness not exceeding 6 inches (15cm).
* The day bed is not intended for children under 15 months of age or over 50 pounds (22.7 kgs).
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB
STEP 1: Detach the front panel (E) from the side panels (B & C) with Allen Key (1).
STEP 2: If mattress support (D) is not in the lowest position, unscrew bolts (4) from left & right
side panels (B & C) and move to the lowest position.
STEP 3: Attach bottom rail (F) to side panels (B & C) using bolts (2) and spring washers (6).
Use Allen Key (1) to tighten all bolts.
STEP 4: Ensure all bolts are tightly secured.
DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH
STEP 1: Follow steps 1 to 3 of the crib assembly instruction.
STEP 2: Follow steps 2 and 4 for the day bed assembly instruction located above (starting
from crib).
4-IN-1 CONVERTIBLE CRIB
DA7790B4-HSY