2
Description and Function
2.1
12 in 1 USB-C™-Multidock with Wireless Charging, Speakers and
Power Delivery (100W)
The USB-C™ Multidock extends a USB-C™ port by 3 USB-A 3.0 ports, a USB-A 2.0 port, an SD
card reader, a microSD card reader, a 4k HDMI™ port, a network port, a 3.5 mm jack socket as well
as a speaker and a wireless charger for smartphones.
2.2
Operating elements and product parts
1
Volume control louder
4
Rubberised stand with cable winde
6
MicroSD socket
9
3.5 mm stereo headphone jack
12 HDMI™ Female connector (Type A)
2.3
Scope of delivery
12 in 1 USB-C™-Multidock with Wireless Charging, Speakers and Power Delivery (100W), user
manual
3
Intended Use
We do not permit using the device in other ways like described in chapter „Description and
Function" or in the „Safety Instructions". Use the product only in dry interior rooms. Not
attending to these regulations and safety instructions might cause fatal accidents, injuries,
and damages to persons and property.
IP20
This product is protected against medium sized foreign objects, but not against water ingress.
4
Preparation
•
Compare the specifications of all used devices to ensure compatibility.
•
Check the scope of delivery for completeness and integrity.
5
Connection
5.1
Speaker
•
Make sure that the USB-C™ port on your laptop or tablet is a full USB 3.1 port that also allows
the laptop or tablet to be charged.
•
Connect the device to your computer.
•
Turn on the device by pressing the button (2).
5.2
USB-C™ Multidock
•
Now connect a suitable USB-C™ charger to the USB-C™ port of the Multidock. The battery of
your laptop or tablet will be charged.
The Multidock functions even without a charger. However, the optimum sound quality of the built-in
speaker is achieved when using the charger.
Please note that the battery life of your laptop will be reduced by the power consumption of the
Multidock if no charger is connected.
2
On/Off switch
7
SDCard socket
10 USB-C™ charging socket
3
Volume control quieter
5
USB-C™ plug
8
3x USB 3.0 socket (type A)
11 2x USB 2.0 socket (type A)
13 RJ45 socket (8P8C)
7