Installing The Door Handle - Crosley XPS15BTH Manual Del Propietário

Installation Instructions

INSTALLING THE DOOR HANDLE

INSTALL FASTENER
1
Install the handle
fastener into the hole
on the freezer and
fresh food doors . The
fasteners correspond
with the handle side
(the side opposite the
hinge) .
STAINLESS STEEL HANDLE
2
1 . Attach handle to freezer door with screws at
the bottom of the handle. Use the included 1/8"
allen wrench to tighten the set screw at the top
of the handle . Tighten until handle is locked
firmly into position .
2 . Attach handle to fresh food door with screws
at the top of the handle. Use the included 1/8"
allen wrench to tighten the set screw at the
bottom of the handle . Tighten until handle is
locked firmly into position .
NOTE: Be sure to
remove film before
handle installation,
if applicable
49-1000109
2A
Handle Fastener
NOTE: Be sure to remove
film before handle installation,
if applicable)
3
PLASTIC HANDLE
1 . Attach handle to freezer door by sliding
handle up onto fastener and with screws at
the bottom of the handle .
2 . Attach handle to fresh food door by sliding
handle down onto fastener and with screws at
top of handle .
BADGE AND PLUG BUTTON
INSTALLATION
1 . Place a plug button on the opposite side of the
fresh food door across from the handle .
2 . Remove the backing on the Crosley badge and
carefully place it covering the hole opposite the
handle on the freezer door . Be sure the badge
is oriented the correct way before applying it to
the door .
Badge
Plug
button
13