Operating The Vacuum Cleaner; Checking The Display - Samsung VS15T70 Serie Manual Del Usuario

Operating the vacuum cleaner

If the brush clings to floors (such as a carpet, a mat, or bedding, etc.) or does not spin properly,
change the suction power to 'MIN' or 'MID' mode.
01
04
18 English
Power ( ) on / off
When pressing the power button, the vacuum
cleaner starts operation in 'MID' mode.
• When the wet brush is assembled,
operation starts in 'WET' mode.
Controlling suction power
You can control the suction power of the
vacuum cleaner.
• + button: Increases suction power.
• - button: Decreases suction power.
❇ ❇ The suction power control button does not
work in 'WET' mode.

Checking the display

02
01 Clogged: Something is clogging the
03
dustbin, pipe, or the connected suction
accessory.
02 Spinning brush stuck: Something is
stuck in the connected spinning brush
accessory.
05
❇ ❇ The spinning brush stuck display will not
turn on if the spinning brush motor stops
because it has overheated.
03 No Filter: The washable micro filter is not
assembled correctly
04 Suction power: Displays the current
suction power.
05 Wet brush cleaning mode: Displays when
the wet brush is assembled.
❇ ❇ If either 01, 02, or 03 blinks a few times
and the vacuum cleaner stops operation,
please take action by referring to the
maintenance part of this manual.