BOCCHI 1602-0126 Serie Instrucciones De Instalación página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Undermount Installation: cont.
Determine the location of the faucet and add additional faucet holes in the sink if needed. The underside of
the sink has pre-scored holes to mark the locations where these should be drilled if necessary.
If drilling extra holes, carefully place
the sink upside down on a suitable and
stable surface. Use a 1 3/8 inch diamond
hole saw to drill in the pre-scored
area(s) where extra holes are needed.
Apply silicone sealant to the sink ledge and set it into place on the underside of the countertop. Press
firmly.
Attach the mounting brackets and firmly tighten the screws to secure the sink to the underside of the
countertop.
Wipe off any excess silicone on the inside of the sink.
www.BOCCHIUSA.com
Anchor
41mm
Countertop
Cabinet
Screw
Seal
Sink
5

Publicidad

Tabla de contenido
loading

Tabla de contenido