Brigmton BTDT2-919 Manual De Instrucciones página 23

FRONT AND REAR PANEL
(1) POWER FUNCTION: PRESS TO TURN ON / OFF THE MAIN POWER
SUPPLY.
(2) DOWN CHANNEL: USED TO CHANGE CHANNELS WITHOUT USING THE
REMOTE CONTROL.
(3) UP CHANNEL: USED TO CHANGE CHANNELS WITHOUT USING THE
REMOTE CONTROL.
(4) LED DISPLAY: USED TO SHOW THE CHANNEL NUMBER OR TIME.
(5) REMOTE CONTROL SENSOR: USED TO RECEIVE THE SIGNAL FROM THE
REMOTE CONTROL.
(6) USB: FOR SOFTWARE UPDATE AND MEDIA PLAYBACK.
(1) RF IN: This connector connects to your external antenna.
(2) RF BRAKING THROUGH: This connector will feed the RF signal to your
TV or other video system,
(3) AV
(4) Coaxial: emits digital audio.
(5) HDMI: High Definition audio and video output used to connect to an
HDMI device.
CONNECTION OF THE SYSTEM
For a basic connection from your set-top box to your TV, you can use the
SCART connection. For a higher quality connection, use a direct HDMI
connection, as shown below. Connect an audio amplifier. The use of coax
is optional.