ASROCK 890GX Extreme4 Manual Del Usuario página 32

Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide
Front USB 3.0 Panel Installation Guide Front USB 3.0 Panel Installation Guide
Step 1
Prepare the bundled Front USB 3.0 Panel, four
HDD screws, and six chassis screws.
Step 3
Intall the Front USB 3.0 Panel into the 2.5" drive
bay of the chassis.
Step 5
Plug the Front USB 3.0 cable into the USB 3.0
header (USB3_2_3) on the motherboard.
Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide
Step 1
Unscrew the two screws from the Front
USB 3.0 Panel.
Step 3
Screw the two screws into the rear
USB 3.0 bracket.
3 2 3 2 3 2
3 2 3 2
ASRock
Step 2
Step 4
Step 6
Step 2
Step 4
890GX Extreme4 Motherboard
Screw the 2.5" HDD/SSD to the Front
USB 3.0 Panel with four HDD screws.
Screw the Front USB 3.0 Panel to the
drive bay with six chassis screws.
The Front USB 3.0 Panel is ready
to use.
Put the USB 3.0 cable and the
rear USB 3.0 bracket together.
Put the rear USB 3.0 bracket into
the chassis.